Original
By certification 
Schneider ac magnetic contactor LC1D115M7
115A 220VAC 3P
| Range of product | TeSys D |
Product or component type |
Contactor |
Device short name |
LC1D |
Contactor application |
Motor control |
Resistive load | |
Utilisation category |
AC-1 |
AC-3 | |
Poles description |
3P |
Power pole contact composition |
3 NO |
[Ue] rated operational voltage |
<= 300 V DC for power circuit |
<= 1000 V AC 25...400 Hz for power circuit | |
[Ie] rated operational current |
115 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit |
200 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit | |
Motor power kW |
65 kW at 1000 V AC 50/60 Hz |
80 kW at 660...690 V AC 50/60 Hz | |
75 kW at 500 V AC 50/60 Hz | |
59 kW at 415...440 V AC 50/60 Hz | |
55 kW at 380...400 V AC 50/60 Hz | |
30 kW at 220...230 V AC 50/60 Hz | |
Motor power HP (UL / CSA) |
100 hp at 575/600 V AC 50/60 Hz for 3 phases motors |
75 hp at 460/480 V AC 50/60 Hz for 3 phases motors | |
40 hp at 230/240 V AC 50/60 Hz for 3 phases motors | |
30 hp at 200/208 V AC 50/60 Hz for 3 phases motors | |
Control circuit type |
AC 50/60 Hz |
Control circuit voltage |
220 V AC 50/60 Hz |
Auxiliary contact composition |
1 NO + 1 NC |
[Uimp] rated impulse withstand voltage |
8 kV conforming to IEC 60947 |
| Overvoltage category | III |
[Ith] conventional free air thermal current |
200 A at <= 60 °C for power circuit |
Irms rated making capacity |
1260 A at 440 V for power circuit conforming to IEC 60947 |
250 A DC for signalling circuit conforming to IEC 60947-5-1 | |
140 A AC for signalling circuit conforming to IEC 60947-5-1 | |
Rated breaking capacity |
1100 A at 440 V for power circuit conforming to IEC 60947 |
[Icw] rated short-time withstand current |
140 A 100 ms signalling circuit |
120 A 500 ms signalling circuit | |
100 A 1 s signalling circuit | |
1100 A <= 40 °C 1 s power circuit | |
950 A <= 40 °C 10 s power circuit | |
550 A <= 40 °C 1 min power circuit | |
250 A <= 40 °C 10 min power circuit | |
Associated fuse rating |
10 A gG for signalling circuit |
200 A gG at <= 690 V coordination type 2 for power circuit | |
250 A gG at <= 690 V coordination type 1 for power circuit | |
Average impedance |
0.60 mOhm at 50 Hz - Ith 200 A for power circuit |
[Ui] rated insulation voltage |
1000 V for power circuit conforming to IEC 60947-4-1 |
600 V for signalling circuit certifications UL | |
600 V for signalling circuit certifications CSA | |
690 V for signalling circuit conforming to IEC 60947-1 | |
600 V for power circuit certifications UL | |
600 V for power circuit certifications CSA | |
Electrical durability |
0.95 Mcycles 115 A AC-3 at Ue <= 440 V |
0.8 Mcycles 200 A AC-1 at Ue <= 440 V | |
Power dissipation per pole |
7.9 W AC-3 |
24 W AC-1 | |
Safety cover |
With |
Mounting support |
Plate |
Rail | |
Standards |
EN 60947-4-1 |
EN 60947-5-1 | |
IEC 60947-4-1 | |
IEC 60947-5-1 | |
UL 508 | |
CSA C22.2 No 14 | |
Product certifications |
BV |
CCC | |
CSA | |
DNV | |
GL | |
GOST | |
RINA | |
UL | |
LROS | |
Connections - terminals |
Power circuit: connector 2 cable(s) 10...50 mm² - cable stiffness: solid - without cable end |
Power circuit: connector 1 cable(s) 10...120 mm² - cable stiffness: solid - without cable end | |
Power circuit: connector 2 cable(s) 10...50 mm² - cable stiffness: flexible - with cable end | |
Power circuit: connector 1 cable(s) 10...120 mm² - cable stiffness: flexible - with cable end | |
Power circuit: connector 2 cable(s) 10...50 mm² - cable stiffness: flexible - without cable end | |
Power circuit: connector 1 cable(s) 10...120 mm² - cable stiffness: flexible - without cable end | |
Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: solid - without cable end | |
Control circuit: screw clamp terminals 1 cable(s) 1...2.5 mm² - cable stiffness: solid - without cable end | |
Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - without cable end | |
Control circuit: screw clamp terminals 1 cable(s) 1...2.5 mm² - cable stiffness: flexible - without cable end | |
Control circuit: screw clamp terminals 1 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end | |
Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end | |
Tightening torque |
Power circuit: 12 N.m - on connector hexagonal 4 mm |
Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2 | |
Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm | |
Operating time |
20...50 ms closing |
6...20 ms opening | |
Safety reliability level |
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 | |
| Mechanical durability | 8 Mcycles |
Operating rate |
2400 cyc/h at <= 60 °C |
Certifications
Packing & Delivery
FAQ
For big packages, we will send them by Air or by sea.We will use good packing and ensure the goods safety.
Introducing the LC1D115M7 Contactor
We are excited to present our latest innovative offering, the LC1D115M7 contactor. This advanced product combines cutting-edge technology with our extensive expertise to provide a reliable solution for all your electrical needs.
The LC1D115M7 contactor is designed to effortlessly control a wide range of electrical devices, from small motors to large industrial machines. Its robust design and premium build quality ensure exceptional performance and durability even in harsh environments.
One of the standout features of the LC1D115M7 contactor is its compact design, allowing seamless integration into your existing electrical systems. Upgrading to the latest technology is now easier than ever, as this contactor eliminates the need for major modifications or costly upgrades.
Customizability is another key aspect of the LC1D115M7 contactor. We understand that each application has unique requirements, and our team of experts will collaborate with you to design a tailored solution. Whether it's voltage rating, current rating, or control circuit, we can create a bespoke contactor that precisely meets your needs.
User-friendliness is a top priority for the LC1D115M7 contactor. It features intuitive controls and easily understandable indicators, ensuring ease of use. With its straightforward installation design, integrating it into your existing system is quick and cost-effective.
Safety is paramount, and the LC1D115M7 contactor sets the industry standard. Built-in safety features protect your electrical system from overloads, short circuits, and other hazards. By safeguarding your equipment and minimizing the risk of staff injuries, this contactor prioritizes your well-being.
If you are seeking a high-quality, reliable, and user-friendly contactor for your electrical system, the LC1D115M7 is the ideal choice.
http://www.tw-rstpower.com/
